Classic Legal precision aerobatic stunter designed by Jerry Phelps

Engine Size: .46 - .60
Wing Span: 57 1/2"
Length: 39 1/2"
Area: 624 sq. in.
Full-Size Plans
Carbon Fiber Bellcrank



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section

by Kaz Minato of the Japanese World Team

Wing Span: 60"
Area: 679 sq. in.
Engine: .61 - .76
100% Laser Cut Parts
Full-Size Printed Plan
Lucky Boxes
Duraloy Gear
Adjustable Leadout Guide
Accurate Rib Cut Outs for Jig Construction
Deluxe Hardware Package



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

by Kaz Minato of the Japanese World Team

Wing Span: 55.5"
Area: 612 sq. in.
Engine: .46 - .61
100% Laser Cut Parts
Full-Size Printed Plan
Lucky Boxes
Adjustable Leadout Guide
Accurate Rib Cut Outs for Jig Construction
Deluxe Hardware Package



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Eric Rule's Profile P40 for Electric Power

Wing Span 52"
Length 39"
Area 624 Sq. In.
Stab Area 151 Sq, In.
Nose Moment 8.8"
Tail Moment 15.75"
Gapless Ribbon Hinge
Hollow Laminated Fuselage

P40 Profile Electric Kit plus RSM's 46 ECL System. Comes complete with propellor, electric motor, ESC, KR governor, Battery.
Power package is complete, fully programmed, bench tested and ready to fly.
The kit plus power system normally sells for $364.98 so the Package will save you $31.00.

For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Spinner - Carbon Fiber Recommended: 2" (CF200)
Main Wheels: 2" (DB5720)
Tail Wheel: 3/4" (DU75TW)
Covering Material - Polyspan Recommended: (PSPAN)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Eric Rule's Profile P40 for Electric Power

Wing Span 52"
Length 39"
Area 624 Sq. In.
Stab Area 151 Sq, In.
Nose Moment 8.8"
Tail Moment 15.75"
Gapless Ribbon Hinge
Hollow Laminated Fuselage



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Spinner - Carbon Fiber Recommended: 2" (CF200)
KDA A36-10XL Brushless Motor: Compare to .46 glow Power (KAD A36-10XL)
ZTW 70A ESC: (ZTW70)
KR Governor/Timer: Designed for use with Profile Models (KRGOV-P)
3300 MaH LiPo 4 Cell 14.8V 25C : (LP3300-4S)
Propellor: 12" (APC12EP)
Main Wheels: 2" (DB5720)
Tail Wheel: 3/4" (DU75TW)
Covering Material - Polyspan Recommended: (PSPAN)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Old Time Stunt Legal

Wing Span: 42"
Length: 24 1/4"
Area: 381 sq. in.
Full-Size Plans
Large Nylon Bellcrank
Lead-Out Cables
Fully Adjustable Leadouts
Arrowshaft Pushrod
Electric Power
Laser Cut Kit

The venerable RINGMASTER which can be taken apart for easy transportation
Electric Powered, it can be carried on a commercial aircraft.

KIT with Complete RSM Electric Package

Power package which includes prop, motor, speed controller, KR Governor & Battery is fully bench tested and comes ready to install.

For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Main Wheels: 2 1/4" (DB5722)
Tail Wheel: N/A
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Old Time Stunt Legal

Wing Span: 42"
Length: 24 1/4"
Area: 381 sq. in.
Full-Size Plans
Large Nylon Bellcrank
Lead-Out Cables
Fully Adjustable Leadouts
Arrowshaft Pushrod
Electric Power
Laser Cut Kit

The venerable RINGMASTER which can be taken apart for easy transportation. Electric Powered, it can be carried on a commercial aircraft.

For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Main Wheels: 2 1/4" (DB5722)
Tail Wheel: N/A
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Wildman 60 by Floyd Carter.
Designed in 1950 this Old Time Legal model was originally powered by an ignition engine.
Wing span is 59-3/4".
Fuselage length is 37-3/8".
Wing Area is 694 Sq. In.

Kit is 100% laser cut using the finest grade contest balsa and birch plywood. It comes complete with full size printed plan, adjustable wing tip weight box, adjustable lead out guide and a 4" bell crank.
Model can be built for ignition, glow or electric power.
Wing has dihedral so the wing tips are at the vertical C/G for even insides and outsides.

Eric Rule's Profile P40 for Electric Power

Wing Span 52"
Length 39"
Area 624 Sq. In.
Stab Area 151 Sq, In.
Nose Moment 8.8"
Tail Moment 15.75"
Gapless Ribbon Hinge
Hollow Laminated Fuselage



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Spinner - Carbon Fiber Recommended: 2" (CF200)
KDA A36-10XL Brushless Motor: Compare to .46 glow Power (KAD A36-10XL)
ZTW 70A ESC: (ZTW70)
KR Governor/Timer: Designed for use with Profile Models (KRGOV-P)
3300 MaH LiPo 4 Cell 14.8V 25C : (LP3300-4S)
Propellor: 12" (APC12EP)
Main Wheels: 2" (DB5720)
Tail Wheel: 3/4" (DU75TW)
Covering Material - Polyspan Recommended: (PSPAN)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Profile Stunter for Beginners by Eric Rule

Wing Span: 42"
Area: 462 sq. in.
Profile Fuselage
Full-Size Plans
Arrowshaft Pushrod
Duralloy Landing Gear
Adjustable Tank Mount
Deluxe Hardware Package



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Spinner: 2" (VOR200)
Engine: .35 (FX13500)
Propellor: 10" (RSM1060)
Fuel Tank: 4 oz. (HF400U)
Main Wheels: 2 1/4" (DB5722)
Tail Wheel: 3/4" (DU75TW)
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Profile Sport/Stunt for .19-.35

Wing Span: 43"
Profile Fuselage
Full-Size Plans
Large Nylon Bellcrank
Leadout Cables
Nylon Horns
Fully Adjustable Leadouts
Formed Wire Landing Gear
Quick to build!
Classic Legal

COSMIC WIND

For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Spinner: 2" (VOR200)
Engine: .35 (FX13500C)
Propellor: 10" (RSM1060)
Fuel Tank: 4 oz. (GRW400BU)
Main Wheels: 2 1/4" (DB5722)
Tail Wheel: 3/4" (DU75TW)
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Naughty Girl by John Ashford

Wing Span: 50 1/4"
Length: 42 7/8"
Area: 553 sq. in.
Engine: .40 - .46
Full-Size Plans
Contest Balsa
Adjustable Leadout Guide
Rib Cut Outs for Jig
Wing Tip Weight Box
Laser Cut Parts
Delux Hardware Package



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Engine: .40 - .46 (LA46LJ)
Propellor: 11" (RSM1160)
Fuel Tank: 5 oz. (HF500U)
Spinner: 2" (VOR200)
Main Wheels: 2" (DB5820)
Tail Wheel: 3/4" (DU75TW)
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Old Time Stunt Legal

Wing Span: 42"
Length: 24 1/4"
Area: 381 sq. in.
Full-Size Plans
Large Nylon Bellcrank
Lead-Out Cables
Fully Adjustable Leadouts
Arrowshaft Pushrod
Engine .19-.35
Laser Cut Kit



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Spinner: N/A
Engine (pick one): .35 (FX13500C)
Engine (pick one): .25 (OSLA25)
Propellor: 10" (RSM1060)
Propellor (Alternate): 9"
Fuel Tank: 4 1/4 oz. (GRW425C)
Fuel Tank (Alternate): 3 3/4 oz. (GRW375C)
Main Wheels: 2 1/4" (DB5722)
Tail Wheel: N/A
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Old Time Stunt Legal

Wing Span: 42"
Length: 24 1/4"
Area: 381 sq. in.
Full-Size Plans
Large Nylon Bellcrank
Lead-Out Cables
Fully Adjustable Leadouts
Arrowshaft Pushrod
Electric Power
Laser Cut Kit

The venerable RINGMASTER which can be taken apart for easy transportation. Electric Powered, it can be carried on a commercial aircraft.

For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Main Wheels: 2 1/4" (DB5722)
Tail Wheel: N/A
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Competitive Profile Stunter for .35-.45

Wing Span: 46"
Length: 36"
Area: 490 sq. in.
Full-Size Plans
1/2" Profile Fuselage
Lead-Out Cables
Deluxe Metal Horns
Fully Adjustable Leadouts
Formed Landing Gear
Ply Doublers



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Spinner: 2" (VOR200)
Engine: .35 (FX13500C)
Propellor: 10" (RSM1060)
Fuel Tank: 4 oz. (HF400U)
Main Wheels: 2" (DB5720)
Tail Wheel: 3/4" (DU75TW)
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Ron Burn's Profile Mustang

Wing Span 36"
100% Laser Cut Parts
Area 291 Sq. In.
Accurate Rib Cut Outs
Length 25-3/4" for Jig Construction
Engines .15-.20
Contest Grade Balsa
Duralloy Gear
Deluxe Hardware
Full-Size Plans
Adjustable Lead Outs



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Spinner: 1 3/4" (VOR175)
Engine: .15 (MAG15)
Propellor: 8"
Fuel Tank: 2 1/2 oz. (HF250U)
Main Wheels: 2" (DB5720)
Tail Wheel: 3/4" (DU75TW)
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

World Champion for .60-.74 Engines by David Fitzgerald

Area 630 Sq. In.
Wing Span 60-3/4"
10-1/2" Nose Moment
18-1/2" Tail Moment
24-3/4" Stabilizer Span
4" Carbon Fibre Bell Crank
Contest Grade Balsa
Full-Size Plans
Laser Cut Parts
Rib Cut Outs for Jig Construction
Wing Tip Weight Box
Deluxe Hardware
Adjustable Lead Out Guide



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Engine: .61 to .75
Spinner: 1 3/4" (VOR175)
Propellor: 13" depending upon engine choice
Fuel Tank: 7 oz. (GRW700BU)
Main Wheels: 2 1/4" (DB5722)
Tail Wheels: 1" (DU100TW)
Hinges: Pin Style (KLETT)
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Precision Aerobatic Stunter by Ted Fancher

Wing Span: 60"
Length: 48"
Area: 660 sq. in.
Engine: Piped .60
100% Laser Cut
Contest Balsa
Deluxe Hardware Package
Full-Size Plans



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Spinner: 2" (VOR200N)
Engine: .60 RO-JETT 60 TUNED PIPE
Propellor: 13"
Fuel Tank: 7 oz. (GRW700WU)
Main Wheels: 2" (DB5720)
Tail Wheel: 1" (DU100TW)
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Precision Aerobatic Stunter by Ted Fancher

Wing Span: 60"
Length: 48"
Area: 660 sq. in.
Engine: Piped .60
100% Laser Cut
Contest Balsa
Full-Size Plans

Short Kits come with 100% laser cut parts and set of plans. The builder provides his own hardware, covering, sheet and stick balsa, and landing gear.

For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Spinner: 2" (VOR200N)
Engine: .60 RO-JETT 60 TUNED PIPE
Propellor: 13"
Fuel Tank: 7 oz. (GRW700WU)
Main Wheels: 2" (DB5720)
Tail Wheel: 1" (DU100TW)
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

by Kaz Minato of the Japanese World Team

Wing Span: 60"
Area: 679 sq. in.
Engine: .61 - .76
100% Laser Cut Parts
Full-Size Printed Plan
Lucky Boxes
Duraloy Gear
Adjustable Leadout Guide
Accurate Rib Cut Outs for Jig Construction
Deluxe Hardware Package



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Twin Engine Stunt for 2 /.35's by Bob Whitely

Wing Span: 65"
Length: 53"
Area: 834 sq. in.
Full-Size Plans
Large Nylon Bellcrank
Metal Horns
Fully Adjustable Leadouts
Tricycle Landing Gear
Arrowshaft Pushrod

Top 10 1987 NATS!

For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Spinner (2 Req.): 2" (VOR200)
Engine (2 Req.): .35 (FX13500C)
Propello (2 Req.): 10" (RSM1060)
Fuel Tank (2 Req.): 4 oz. (GRW400BU)
Main Wheels: 2" (DB5720)
Nose Wheel: 1 3/4" (DB5717)
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

by Bob Whitely

Super 70's Stunter
Wing Span: 54-1/2"
Length: 37"
Area: 557 sq. in.
Engine: .35 - .40
100% Laser Cut
Contest Balsa
Duralloy Gear
Deluxe Hardware
Full-Size Plans
Adjustable Leadouts
Accurate Rib Cutouts for Jig Construction



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section

by Allen Brickhaus

Super 70's Stunter
Wing Span: 52"
Length: 38"
Area: 536 sq. in.
Engine: .35 - .46
100% Laser Cut
Contest Balsa
Duralloy Gear
Deluxe Hardware
Full-Size Plans
Adjustable Leadouts
Accurate Rib Cutouts for Jig Construction



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section

Dee Rice's new .40 size tuned pipe stunter

Wing Span: 56"
Area: 605 sq. in.
Engine: .40 Tuned Pipe
Full-Size Plans
100% Laser Cut
Contest Balsa
Duralloy landing gear
Deluxe Hardware Package
Accurate rib cut outs for jig construction
Classic "Oriental" styling



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Spinner: 2" (VOR200)
Engine: RO-JETT 40 TUNED PIPE
Propellor: 11"
Fuel Tank: 5 oz. (GRW500BU)
Main Wheels: 2 1/2" (DB5725)
Tail Wheel: 3/4" (DU75TW)
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

1st Place 1978 NATS & the Walker Cup, by Bob Whitely

For .46-.60
Wing Span: 56"
Length: 43-1/2"
Area: 670 sq. in.
Full-Size Plans
Full Canopy
Large Nylon Bellcrank
Lead-Out Cables
Metal Horns
Arrowshaft Pushrod
Formed Landing Gear



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Spinner: 2" (VOR200)
Engine: .60
Propellor: 13"
Fuel Tank: 7 oz. (GRW700WU)
Main Wheels: 2" (DB5720)
Tail Wheel: 3/4" (DU75TW)
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

by Kaz Minato of the Japanese World Team

Wing Span: 55.5"
Area: 612 sq. in.
Engine: .46 - .61
100% Laser Cut Parts
Full-Size Printed Plan
Lucky Boxes
Adjustable Leadout Guide
Accurate Rib Cut Outs for Jig Construction
Deluxe Hardware Package



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Precision Aerobatic Stunter by Gordan Delaney

Wing Span: 57"
Length: 49"
Area: 650 sq. in.
Engine: .51 - .65
100% Laser Cut
Contest Balsa



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Spinner: 2" (VOR200)
Propellor: 12" (RSM1255)
Propellor (Alternate): 13"
Fuel Tank: 6 oz. (GRW600BU)
Fuel Tank (Alternate): 7 oz. (GRW700WU)
Main Wheels: 2" (DB5720)
Nose Wheel: 1 3/4" (DB5717)
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Semi-Scale Warbird for .40-.46 by Jack Sheeks

Wing Span: 50"
Length: 39-1/2"
Area: 570 sq. in.
Full-Size Plans
Large Nylon Bellcrank
Lead-Out Cables
Metal Horns
Fully Adjustable Leadouts
Deluxe Hardware Kit
Warbird favorite!

RSM's WARBIRD SERIES!

For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Spinner: 2" (VOR200)
Engine (Pick one): .35 (FX13500C)
Engine (Pick one): .40
Propellor: 10" (RSM1060)
Propellor (Alternate): 11" (RSM1160)
Fuel Tank: 4 oz. (GRW400BU)
Main Wheels: 2" (DB5720)
Tail Wheel: 3/4" (DU75TW)
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Pat King's Twin .15 Stunter Inspired by Bob Whitely's L.A. Heat

Wing Span: 48-3/4"
Length: 41-1/4"
Area: 463 sq. in.
Engines: 2 - .15
100% Laser Cut
Contest Balsa
Duralloy Gear
Deluxe Hardware
Full-Size Plans
Adjustable Leadouts
Accurate Rib Cutouts for Jig Construction



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section

Semi-Scale Twin by Jack Sheeks

Wing Span: 58"
Length: 37-3/4"
Area: 579 sq. in.
Engine: Two .35 -.40
100% Laser Cut
Contest Balsa
Full-Size Plans

Fully Laser cut from contest grade balsa. Includes deluxe hardware package, silk span covering, adjustable lead out guide, and full size rolled plans.

For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Spinner (2 Req.): 2" (VOR200)
Engine (2 Req.): .35 (FX13500C)
Propellor (2 Req.): 10" (RSM1060)
Fuel Tank (2 Req.): 4 oz. (GRW400BU)
Main Wheels: 2 1/2" (DB5725)
Tail Wheel: 1" (DU100TW)
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Naughty Girl by John Ashford

Wing Span: 50 1/4"
Length: 42 7/8"
Area: 553 sq. in.
Engine: .40 - .46
Full-Size Plans
Contest Balsa
Adjustable Leadout Guide
Rib Cut Outs for Jig
Wing Tip Weight Box
Laser Cut Parts
Delux Hardware Package



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Engine: .40 - .46 (LA46LJ)
Propellor: 11" (RSM1160)
Fuel Tank: 5 oz. (HF500U)
Spinner: 2" (VOR200)
Main Wheels: 2" (DB5820)
Tail Wheel: 3/4" (DU75TW)
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Modern Stunter for .40-.45 by Pat Johnston

Wing Span: 53-1/4"
Length: 39-1/2"
Area: 560 sq. in.
Full-Size Plans
Large Nylon Bellcrank
Lead-Out Cables
Metal Horns
Fully Adjustable Leadouts
Arrowshaft Pushrod
Deluxe Hardware

RSM's WARBIRD SERIES!

For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Spinner: 1 3/4" (VOR175)
Engine: .40 (FX14098C)
Propellor: 10" (RSM1060)
Propellor (Alternate): 11" (RSM1160)
Fuel Tank: 4 oz. (GRW400BU)
Main Wheels: 2 1/2" (DB5725)
Tail Wheel: 3/4" (DU75TW)
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Semi-Scale Precision Stunter for .46-.60

Wing Span: 56"
Length: 39"
Area: 610 sq. in.
Full-Size Plans
Large Nylon Bellcrank
Lead-Out Cables
Metal Horns
Fully Adjustable Leadouts
Arrowshaft Pushrod
Deluxe Hardware

SEMI-SCALE FULL STUNT! Designed by Pat Johnston & Eric Rule

For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Spinner: 2" (VOR200)
Engine: .46
Propellor: 12" (RSM1255)
Fuel Tank: 5 1/2 oz. (GRW550BU)
Main Wheels: 2 1/2" (DB5725)
Tail Wheel: 1 1/4" (DU125TW)
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Pentastar by Lou Wolgast

Two versions included in one kit
Wing Span: 58"(.46 Version) 61" (.61 Version)
Length: 44"
Area: 654 sq. in. (.46 Version) 693 sq. in. (.61 Version)
Engine: .46 or .61
Full-Size Plans
Contest Balsa
Carbon Fibre Bell Crank
Adjustable Leadout Guide
Rib Cut Outs for Jig
Duralloy landing Gear
Wing Tip Weight Box
Laser Cut Parts
Delux Hardware Package



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Engine: .46 or .61
Propellor: 11" or 12" Depending on Engine
Fuel Tank: 7 oz. (GRW700WU)
Spinner: 2" (VOR200N)
Main Wheels: 2" (DB5820)
Tail Wheel: 3/4" (DU75TW)
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Pole Dancer by John Ashford

Wing Span: 55 3/8"
Length: 43"
Area: 570 sq. in.
Engine: .40 - .46
Full-Size Plans
Contest Balsa
Adjustable Leadout Guide
Rib Cut Outs for Jig
Wing Tip Weight Box
Laser Cut Parts
Delux Hardware Package



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Engine: .40 - .46 (LA46LJ)
Propellor: 11" (RSM1160)
Fuel Tank: 5 oz. (GRW500BU)
Spinner: 2" (VOR200)
Main Wheels: 2" (DB5820)
Tail Wheel: 3/4" (DU75TW)
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Modern Stunter for .46-.60 by Bob Whitely

Wing Span: 58"
Area: 660 sq. in.
Full-Size Plans
Laser Cut Ribs and Fuselage Formers
Fully Adjustable Lead Outs
Arrowshaft Pushrod
Large Nylon Bellcrank
Deluxe Hardware Package



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Spinner: 2 1/4" (VOR225)
Engine: .60 RO-JETT 60 TUNED PIPE
Propellor: 13"
Fuel Tank: 7 oz. (GRW700WU)
Main Wheels: 2 1/4" (DB5722)
Tail Wheel: 1" (DU100TW)
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

by Larry Renger

Modern Stunt Profile
Wingspan 30"
Length 21"
Area 180 sq. in.
Engine .049 - .061
Balloon Tank included
1" Main Wheels included
Tail Wheel Skid included
Laser cut from contest grade balsa
Rolled plans
Deluxe hardware package



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Engine: .049 - .061 Cox Medallion or TD, Norvell, or AP Wasp .061 suitable
Propellor: 6"
Spinner: N/A
Hinges: Builder's Choice
Fuel Line: Small
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Competitive Precision Stunter

3 Versions in one kit!
Builds as either "35", "46" or "60" version
Classic Legal (46 & 35 versions)
46 version flown in 1958
35 version kitted in 1962
Wing Span: (46 version) 56-1/2"
Area: (46 version) 614 sq. in.
Length: (all versions) 39-3/4"
Full-size plans signed by Ed Southwick
Aluminum Landing Gear
Fully Adjustable lead-outs
Arrowshaft pushrod
Deluxe Hardware
Laser Cut Ribs



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Spinner: 2" (VOR200)
Engine (.35 Version): .35 (FX13500C)
Engine (.35 Version Alternate): .40
Propellor: 10" (RSM1060)
Propellor (Alternate): 11" (RSM1160)
Tank: 4 oz. (GRW400BU)
Engine (.46 Version): .46
Propellor: 12" (RSM1255)
Tank: 5 1/2 oz. (GRW550BU)
Engine (.60 Version): .60
Propellor: 13"
Tank: 7 oz. (GRW700WU)
Main Wheels: 2" (DB5720)
Tail Wheel: 3/4" (DU75TW)
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

by Ed Capitanelli

Modern Stunt
Wingspan 56.5"
Length 41"
Area 635 sq. in.
Engine .40 - .46
Laser cut from contest grade balsa
Rolled plans
Deluxe hardware package



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Spinner: 2" (VOR200)
Engine: .46
Propellor: 11" (RSM1160)
Tank: 5 1/2 oz. (GRW550BU)
Main Wheels: 2" (DB5720)
Tail Wheel: 3/4" (DU75TW)
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Thunder Cloud by John Ashford

Wing Span: 60"
Length: 46 1/2"
Area: 665 sq. in.
Engine: .61 - .76
Full-Size Plans
Contest Balsa
Adjustable Leadout Guide
Rib Cut Outs for Jig
Wing Tip Weight Box
Laser Cut Parts
Delux Hardware Package



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Engine: .61 - .76
Propellor: 12" (RSM1255)
Fuel Tank: 7 oz. (GRW700WU)
Spinner: 2" (VOR200)
Main Wheels: 2" (DB5820)
Tail Wheel: 3/4" (DU75TW)
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Precision 1/2A Stunter Designed by Eric Rule

Engines: .049-.061
Area: 225 sq. in.
Span 35"
Length 21"
Full Sized Plans
Heavy Duty Bell Crank
Lead Out Cables
Adjustable Wing Tip Weight Box
Metal Control Horns
Formed Landing Gear
100% Laser Cut
Flies the complete stunt pattern



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Engine: .049 - .061 Cox Medallion or TD, Norvell, or AP Wasp .061 suitable
Propellor: 6"
Fuel Tank: 1 3/4 oz. (BALL)
Spinner: 1 1/4"
Main Wheels:
Tail Wheel:
Hinges: Builder's Choice
Fuel Line: Small
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Sport and Stunt for 1/2 A Power

Wing Span: 24"
Length: 16-3/4"
Area: 125 sq. in.
Full-Size Plans
Small Nylon Bellcrank
Lead Out Cables
Nylon Horns
Wheels and Landing Gear
Fun Flyer!



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Engine: .049 Cox Reed Valve .049 suitable
Propellor: 6"
Fuel Tank: N/A
Main Wheels:
Tail Wheel:
Hinges: Builder's Choice
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Large Precision Stunter for 1/2A Power by Dee Rice

Wing Span: 34"
Length: 21"
Area: 220 sq. in.
Full-Size Plans
Nylon Bellcrank
Lead-Out Cables
Metal Horns
Fully Adjustable Lead Outs
Formed Landing Gear
Laser Cut Kit

FLYS COMPLETE PATTERN! On TD .049 - .051

For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Engine: .049 - .061 Cox Medallion or TD, Norvell, or AP Wasp .061 suitable
Propellor: 6"
Fuel Tank: 1 3/4 oz. (BALL)
Spinner: 1 1/4"
Main Wheels:
Hinges: Builder's Choice
Fuel Line: Small
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

by Larry Renger

Modern Stunt Profile
Wingspan 30"
Length 21"
Area 180 sq. in.
Engine .049 - .061
Balloon Tank included
1" Main Wheels included
Tail Wheel Skid included
Laser cut from contest grade balsa
Rolled plans
Deluxe hardware package



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Engine: .049 - .061 Cox Medallion or TD, Norvell, or AP Wasp .061 suitable
Propellor: 6"
Spinner: N/A
Hinges: Builder's Choice
Fuel Line: Small
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Classic Legal precision aerobatic stunter designed by Jerry Phelps

Engine Size: .46 - .60
Wing Span: 57 1/2"
Length: 39 1/2"
Area: 624 sq. in.
Full-Size Plans
Carbon Fiber Bellcrank



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section

1957 "Green Box" Version

Wing Span: 50.5"
Length 38-1/2"
Area: 550 sq. in.
Full-Size Plans
Full Hardware Package
Arrowshaft Pushrod
Fully Adjustable Lead-outs
Laser Cut Ribs and Fuselage Formers
Winner 12 Nats, 2 Worlds



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Spinner: 1 3/4" (VOR175)
Engine (Pick One): .35 (FX13500C)
Engine (Pick One): .40
Propellor: 10" (RSM1060)
Propellor (Alternate): 11" (RSM1160)
Fuel Tank: 4 oz. (GRW400BU)
Main Wheels: 2 1/2" (DB5725)
Tail Wheel: 3/4" (DU75TW)
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Bob Whitely's 1969 Classic

Wing Span 58-7/8"
100% Laser Cut Parts
Area 660 Sq. In.
Accurate Rib Cut Outs
Length 47-1/2" for Jig Construction
Engines .45 - .61
Contest Grade Balsa
Wire Gear
Deluxe Hardware
Full-Size Plans
Adjustable Lead Outs



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Spinner: 2 1/4" (VOR225N)
Engine: .61
Propellor: 13"
Fuel Tank: 7 oz. (GRW700WU)
Main Wheels: 2 1/2" (DB5725)
Nose Wheel: 2" (DB5720)
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

by Charles A. Mackey

Classic Legal
Span: 42.6"
Length: 26.5"
Area: 374 sq. in.
Engine: .25 - .35
100% Laser Cut



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section

Classic Legal Warbird by Charles A. Mackey, for .35-.45

Wing Span: 53"
Length: 41-3/4"
Area: 570 sq. in.
Full-Size Plans
Large Nylon Bellcrank
Lead-Out Cables
Metal Horns
Fully Adjustable Leadouts
Tricycle Landing Gear
Sleek Styling

RSM's WARBIRD SERIES!

For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Spinner: 2" (VOR200)
Engine (Pick One): .35 (FX13500C)
Engine (Pick One): .40
Propellor: 10" (RSM1060)
Propellor (Alternate): 11" (RSM1160)
Fuel Tank: 4 oz. (GRW400BU)
Main Wheels: 1 3/4" (DB5817)
Nose Wheels: 1 3/4" (DB5817)
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Chipmunk - Classic Legal by Joe Dill

Wing Span: 51
length 38"
Area: 532 sq. in.
Engine: .35 - .40
Formed Wire landing Gear
Full-Size Plans
100% Laser Cut Parts
Accurate Rib Cut Outs for Jig Construction
Deluxe Hardware Package
Adjustable Leadout Guide



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Engine: .35 (L&J Fox) or .46 (LA46)
Propellor: RSM10-6 (RSM1060)
Fuel Tank: 4 oz. (HF400U)
Spinner: 2" (VOR200)
Main Wheels: 2" (DB5820)
Tail Wheel: 3/4" (DU75TW)
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Classic Legal
Wing Span: 51"
Length: 39-1/4"
Area: 540 sq. in.
Engine: .35 - .40
100% Laser Cut
Contest Balsa
Full-Size Plans



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Spinner: 1 3/4" (VOR175)
Engine (Pick one): .35 (FX13500C)
Engine (Pick one): .40
Propellor: 10" (RSM1060)
Propellor: 11" (RSM1160)
Fuel Tank: 4 oz. (GRW400BU)
Main Wheels: 2" (DB5720)
Tail Wheel: 3/4" (DU75TW)
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

By Kenhi

Classic Legal
Wingspan 54"
Length 36.5"
Area 559 sq. in.
Engine .35 - .40
Laser cut from contest grade balsa
Rolled plans
Deluxe hardware package



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Spinner: 2" (VOR200)
Engine: .35 (FX13500C)
Propellor: 10" (RSM1060)
Fuel Tank: 4 oz. (GRW400BU)
Main Wheels: 2" (DB5720)
Tail Wheel: 3/4" (DU75TW)
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Precision Stunter for .35-.40, by Dick Williams

Wing Span: 54"
Length: 38"
Area: 610 sq. in.
Full-Size Plans
Large Nylon Bellcrank
Lead-Out Cables
Metal Horns
Fully Adjustable Leadouts
Arrowshaft Pushrod
Classic Legal

Top 10 1963 NATS!

For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Spinner: 2" (VOR200)
Engine (Pick One): .35 (FX13500C)
Engine (Pick One): .40
Propellor: 10" (RSM1060)
Propellor (Alternate): 11" (RSM1160)
Fuel Tank: 4 oz. (GRW400BU)
Main Wheels: 2 1/4" (DB5722)
Tail Wheel: 3/4" (DU75TW)
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Classic Legal Semi-Scale Stunter by Bill Suarez

Wing Span: 50 1/2"
Area: 525 sq. in.
Engine: .35 - .40
Full-Size Plans
Contest Balsa
Adjustable Leadout Guide
Rib Cut Outs for Jig
Wing Tip Weight Box
Laser Cut Parts
Delux Hardware Package
Features 6 degree Anhedral Stab

CLASSIC LEGAL SEMI-SCALE PRECISION STUNTER.
Designed By Bill Suarez 1969.
Published in American Aircraft Modeler June 1971.


For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Engine-L&J Fox 35 recommended: .35 - .40 (FX13500C)
Propellor: 10" (RSM1060)
Fuel Tank: 4 oz. (GRW400BU)
Spinner: 2" Needle Nose (VOR200N)
Nose Wheel: 1 3/4" (DB5717)
Main Wheels: 2" (DB5720)
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

1955 Classic Design by Ted Goyet
Old Time Legal

2 Versions included in kit
Wing Span: 44"
Length: 29 1/2"
Area: 388 sq. in.
Engine: .25 - .30
100% Laser Cut
Contest Balsa
Deluxe Hardware Package
Full-Size Plans



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Engine: .25
Propellor: 9"
Fuel Tank: 3 1/2 oz. (GRW350BU)
Spinner: 1 3/4" (VOR175)
Main Wheels: 2 1/2" (DB5725)
Tail Wheel: N/A
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Classic Legal 1957 Design- By Wild Bill Netzeband

Span: 54"
Length: 32"
Area: 917 sq. in.
Engine: .40 - .46
Weight: 44 oz.
100% Laser Cut
Classic Legal 1957 Design



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Spinner: 2" (VOR200)
Engine: .40
Propellor (Alternate): 11" (RSM1160)
Fuel Tank: 4 oz. (GRW400BU)
Main Wheels: 2" (DB5720)
Tail Wheel: 3/4" (DU75TW)
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

by Lou Wolgast

Classic Legal
Wingspan 55.5"
Length 38"
Area 577 sq. in.
Engine .40 -.46
Laser cut from contest grade balsa
Rolled plans
Deluxe hardware package



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Spinner: 2" (VOR200)
Engine: .40
Propellor (Alternate): 11" (RSM1160)
Fuel Tank: 4 oz. (GRW400BU)
Main Wheels: 2" (DB5720)
Tail Wheel: 3/4" (DU75TW)
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Gladiator - Classic Legal by Dennis Shauer

Two versions included in one kit
Wing Span: 58"(.35 Version) 67"(.46 Version)
Stab/Elevator 25"(.35 Version), 29"(.46 Version)
Area: 660 sq. in. (.35 Version) 735 sq. in. (.46 Version)
Engine: .35 or .46
100% Laser Cut Parts
Full-Size Printed Plan
Lucky Boxes
Formed Wire landing Gear
Adjustable Leadout Guide
Accurate Rib Cut Outs for Jig Construction
Deluxe Hardware Package



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Engine: .35 (L&J Fox) or .46 (LA46)
Propellor: RSM10" or 11" Depending on Engine
Fuel Tank: 4 oz. (HF400U)
Spinner: 2 1/4" (VOR225)
Main Wheels: 2 1/4" (DB5822)
Tail Wheel: 1" (DU100TW)
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Larry Scarinzi's Classic Stunter

Wing Span: 54"
Length: 31-1/2"
Area: 527 sq. in.
Engine: .35 - .40
100% Laser Cut
Contest Balsa
Formed Wire Gear
Deluxe Hardware
Full-Size Plans
Adjustable Leadouts
Accurate Rib Cutouts for Jig Construction



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section

Classic Legal - By Wild Bill Netzeban

Span: 58"
Length: 29.5"
Area: 500 sq. in.
Weight: 44 oz.
100% Laser Cut
Classic Legal



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section

Classic Legal by Charles A. Mackey for .35-.40

Wing Span: 52"
Length: 39-3/4"
Area: 570 sq. in.
Full-Size Plans
Large Nylon Bellcrank
Metal Horns
Fully Adjustable Leadouts
Deluxe Hardware Kit
Popular Kit!

Authenticated CLASSIC LEGAL!

For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Spinner: 2" (VOR200)
Engine (Pick One): .35 (FX13500C)
Engine (Pick One): .40
Propellor: 10" (RSM1060)
Propellor (Alternate): 11" (RSM1160)
Fuel Tank: 4 oz. (GRW400BU)
Main Wheels: 2" (DB5720)
Tail Wheel: 3/4" (DU75TW)
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

by Charles A. Mackey

Published September, 1958 in American Modeler
Classic Legal
Span: 52-1/2"
Length: 34"
Area: 557 sq. in.
Engine: .35
100% Laser Cut



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Engine (Pick One): .35 (FX13500C)
Engine (Pick One): .40
Propellor: 10" (RSM1060)
Propellor (Alternate): 11" (RSM1160)
Fuel Tank: 4 oz. (GRW400BU)
Main Wheels: 2 1/4" (DB5722)
Tail Wheel: 3/4" (DU75TW)
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

by Jim Ebejer

Classic Legal "I BEAM"
Wingspan 50"
Length 35.75"
Area 536 sq. in.
Engine .35 - .40
Laser cut from contest grade balsa
Rolled plans
Deluxe hardware package



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Spinner: 2" (VOR200)
Engine (Pick One): .35 (FX13500C)
Engine (Pick One): .40
Propellor: 10" (RSM1060)
Propellor (Alternate): 11" (RSM1160)
Fuel Tank: 4 oz. (GRW400BU)
Main Wheels: 1 3/4" (DB5717)
Tail Wheel: 3/4" (DU75TW)
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Classic Stunt Legal by Lew McFarland

Wing Span: 50"
Length: 34 1/4"
Area: 545 sq. in.
Full-Size Plans
Large Nylon Bellcrank
Lead-Out Cables
Fully Adjustable Leadouts
Arrowshaft Pushrod
Engine .35-.40
Laser Cut Kit



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Spinner: 2" (VOR200)
Engine (Pick One): .35 (FX13500C)
Engine (Pick One): .40
Propellor: 10" (RSM1060)
Propellor (Alternate): 11" (RSM1160)
Fuel Tank: 4 oz. (GRW400BU)
Main Wheels: 2 1/2" (DB5725)
Tail Wheel: 3/4" (DU75TW)
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Classic Stunt Legal by Lew McFarland

Classic Legal
Wingspan 52"
Length 40"
Area 554 sq. in.
Engine .35 - .40
Laser cut from contest grade balsa
Rolled plans
Deluxe hardware package



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Spinner: 2" (VOR200)
Engine (Pick One): .35 (FX13500C)
Engine (Pick One): .40
Propellor: 10" (RSM1060)
Propellor (Alternate): 11" (RSM1160)
Fuel Tank: 4 oz. (GRW400BU)
Main Wheels: 2 1/4" (DB5722)
Nose Wheel: 1 3/4" (DB5717)
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Classic Legal for .45-.61 by Lew McFarland

Wing Span: 58-7/8"
Length: 41-3/4"
Area: 686 sq. in.
Full-Size Plans
Large Nylon Bellcrank
Lead-Out Cables
Metal Horns
Fully Adjustable Leadouts
Arrowshaft Pushrod
Tricycle Gear



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Spinner: 2" (VOR200)
Engine: .60
Propellor: 13"
Fuel Tank: 7 oz. (GRW700WU)
Main Wheels: 2 1/2" (DB5725)
Nose Wheel: 2" (DB5720)
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Competitive Precision Stunter

3 Versions in one kit!
Builds as either "35", "46" or "60" version
Classic Legal (46 & 35 versions)
46 version flown in 1958
35 version kitted in 1962
Wing Span: (46 version) 56-1/2"
Area: (46 version) 614 sq. in.
Length: (all versions) 39-3/4"
Full-size plans signed by Ed Southwick
Aluminum Landing Gear
Fully Adjustable lead-outs
Arrowshaft pushrod
Deluxe Hardware
Laser Cut Ribs



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Spinner: 2" (VOR200)
Engine (.35 Version): .35 (FX13500C)
Engine (.35 Version Alternate): .40
Propellor: 10" (RSM1060)
Propellor (Alternate): 11" (RSM1160)
Tank: 4 oz. (GRW400BU)
Engine (.46 Version): .46
Propellor: 12" (RSM1255)
Tank: 5 1/2 oz. (GRW550BU)
Engine (.60 Version): .60
Propellor: 13"
Tank: 7 oz. (GRW700WU)
Main Wheels: 2" (DB5720)
Tail Wheel: 3/4" (DU75TW)
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

by Juri Sirotkin

Classic Legal
Wingspan 56"
Length 39.5"
Area 626 sq. in.
Engine .35 - .40
Laser cut from contest grade balsa
Rolled plans
Deluxe hardware package



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Spinner: 2" (VOR200)
Engine: .35 (FX13500C)
Propellor: 10" (RSM1060)
Fuel Tank: 4 oz. (GRW400BU)
Main Wheels: 2" (DB5820)
Tail Wheel: 3/4" (DU75TW)
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Classic Legal
Wingspan 42
Length 24.5
Area 381 sq. in.
Engine .25 - .35
Laser cut from contest grade balsa
Rolled plans
Deluxe hardware package



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Spinner: 2" (VOR200)
Engine: .25
Propellor: 9"
Fuel Tank: 3 1/2 oz. (OTS350)
Main Wheels: 2" (DB5720)
Tail Wheel: 3/4" (DU75TW)
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

by Keith Trostle

Classic Legal
Wingspan 56"
Length 38.5"
Area 597 sq. in.
Engine .46
Laser cut from contest grade balsa
Rolled plans
Deluxe hardware package



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Spinner: 2" (VOR200)
Engine: .46
Propellor (Alternate): 11" (RSM1160)
Fuel Tank: 4 oz. (GRW400BU)
Main Wheels: 2" (DB5720)
Tail Wheel: 1 1/4" (DU125TW)
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Classic Legal Stunter for .35-.45 by Bart Klapinski

Wing Span: 54"
Length: 39"
Area: 610 sq. in.
Full-Size Plans
Large Nylon Bellcrank
Lead-Out Cables
Metal Horns
Fully Adjustable Leadouts
Tricycle Landing Gear
Classic Legal

1st Place 1967 NATS!

For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Spinner: 2" (VOR200)
Engine (Pick One): .35 (FX13500C)
Engine (Pick One): .40
Propellor: 10" (RSM1060)
Propellor (Alternate): 11" (RSM1160)
Fuel Tank: 4 oz. (GRW400BU)
Main Wheels: 2 1/4" (DB5722)
Nose Wheel: 2" (DB5720)
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Classic Legal 1959 Version Stunter for .35-.45 by Bob Palmer

Wing Span: 56"
Length: 39"
Area: 570 sq. in.
Autographed Full-Size Plans
Large Nylon Bellcrank
Lead-Out Cables
Metal Horns
Fully Adjustable Leadouts
Aluminum Landing Gear

1959 BOB PALMER DESIGN!

For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Spinner: 2" (VOR200)
Engine (Pick One): .35 (FX13500C)
Engine (Pick One): .40
Propellor: 10" (RSM1060)
Propellor (Alternate): 11" (RSM1160)
Fuel Tank: 4 oz. (GRW400BU)
Main Wheels: 2 1/4" (DB5722)
Tail Wheel: 3/4" (DU75TW)
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

by Tom Warden

Wingspan 55"
Length 39 1/2"
Area 572 sq. in.
Engine .46
Classic Legal
Laser cut from contest grade balsa
Rolled plans
Deluxe hardware package
Includes a wing jig



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Spinner: 1 3/4" (VOR175N)
Engine: .46
Propellor: 11" (RSM1160)
Fuel Tank: 5 1/2 oz. (GRW550BU)
Main Wheels: 2" (DB5820)
Tail Wheel: 1" (DU100TW)
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Classic Legal Warbird Stunter for .35-.45

Wing Span: 56"
Length: 37"
Area: 560 sq. in.
Full-Size Plans
Large Nylon Bellcrank
Lead-Out Cables
Fully Adjustable Leadouts
Classic Legal as seen in the 3/63 American Modeler mag

1ST PLACE '63 BRITISH NATS!

For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Spinner: 2" (VOR200)
Engine (Pick One): .35 (FX13500C)
Engine (Pick One): .40
Propellor: 10" (RSM1060)
Propellor (Alternate): 11" (RSM1160)
Fuel Tank: 4 oz. (GRW400BU)
Main Wheels: 2 1/4" (DB5722)
Tail Wheel: 1" (DU100TW)
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Classic Legal Precision Stunter for .35-.45

Wing Span: 53"
Length: 35"
Area: 560 sq. in.
Full-Size Plans
Large Nylon Bellcrank
Metal Horns
Fully Adjustable Leadouts
Arrowshaft Pushrod
Formed Landing Gear



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Spinner: 1 3/4" (VOR175)
Engine (Pick One): .35 (FX13500C)
Engine (Pick One): .40
Propellor: 10" (RSM1060)
Propellor (Alternate): 11" (RSM1160)
Fuel Tank: 4 oz. (GRW400BU)
Main Wheels: 1 3/4" (DB5717)
Tail Wheel: 3/4" (DU75TW)
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Eric Rule's Profile P40 for Electric Power

Wing Span 52"
Length 39"
Area 624 Sq. In.
Stab Area 151 Sq, In.
Nose Moment 8.8"
Tail Moment 15.75"
Gapless Ribbon Hinge
Hollow Laminated Fuselage

P40 Profile Electric Kit plus RSM's 46 ECL System. Comes complete with propellor, electric motor, ESC, KR governor, Battery.
Power package is complete, fully programmed, bench tested and ready to fly.
The kit plus power system normally sells for $364.98 so the Package will save you $31.00.

For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Spinner - Carbon Fiber Recommended: 2" (CF200)
Main Wheels: 2" (DB5720)
Tail Wheel: 3/4" (DU75TW)
Covering Material - Polyspan Recommended: (PSPAN)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Old Time Stunt Legal

Wing Span: 42"
Length: 24 1/4"
Area: 381 sq. in.
Full-Size Plans
Large Nylon Bellcrank
Lead-Out Cables
Fully Adjustable Leadouts
Arrowshaft Pushrod
Electric Power
Laser Cut Kit

The venerable RINGMASTER which can be taken apart for easy transportation
Electric Powered, it can be carried on a commercial aircraft.

KIT with Complete RSM Electric Package

Power package which includes prop, motor, speed controller, KR Governor & Battery is fully bench tested and comes ready to install.

For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Main Wheels: 2 1/4" (DB5722)
Tail Wheel: N/A
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Old Time Legal 1950 Design
Span: 48.5"
Length: 30.25"
Area: 470 sq. in.
Engine: .25 - .35

100% Laser Cut

For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Engine: .25 to .35 Builder's Choice
Propellor: 10-5 or 10-6 (RSM1060)
Fuel Tank: 4 oz. (GRW400BU)
Spinner: 2" (VOR200)
Main Wheels: 2" (DB5720)
Tail Wheel: 3/4" (DU75TW)
Hinges: Builder's Choice
Fuel LIne: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

By Dale Kirn

Old Time Legal
Wing Span: 56-1/4"
Length: 35"
Area: 720 sq. in.
Engine: .46 - .60
100% Laser Cut
Contest Balsa
Duralloy or Wire Gear
Deluxe Hardware Package
Full-Size Plans



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Engine: .46 (OSLA46)
Propellor: 12" (RSM1255)
Fuel Tank: 5 oz. (GRW500BU)
Spinner: 2" (VOR200)
Main Wheels: 2 1/2" (DB5725)
Tail Wheel: 3/4" (DU75TW)
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

By Addie Naccarato

OTS Legal
Wingspan 54"
Length 32.5"
Area 572 sq. in.
Engine .59 - .61
Laser cut from contest grade balsa
Rolled plans
Deluxe hardware package



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Engine: Fox .59
Propellor: 13"
Fuel Tank: Custom
Spinner: 2" (VOR200)
Main Wheels: 1 3/4" (DB5717)
Tail Wheel: 3/4" (DU75TW)
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

1955 Classic Design by Ted Goyet
Old Time Legal

2 Versions included in kit
Wing Span: 44"
Length: 29 1/2"
Area: 388 sq. in.
Engine: .25 - .30
100% Laser Cut
Contest Balsa
Deluxe Hardware Package
Full-Size Plans



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Engine: .25
Propellor: 9"
Fuel Tank: 3 1/2 oz. (GRW350BU)
Spinner: 1 3/4" (VOR175)
Main Wheels: 2 1/2" (DB5725)
Tail Wheel: N/A
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Old Time Stunt Legal by Ted Snow

Wing Span: 54"
Length: 32-3/4"
Area: 630 sq. in.
Full-Size Plans
Large Nylon Bellcrank
Lead/Out Cables
Metal Horns
Fully Adjustable Leadouts
Designed by Ted Snow in Sept. 1949



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Engine: .46 (OSLA46)
Propellor: 12" (RSM1255)
Fuel Tank: 5 1/2 oz. (GRW550BU)
Main Wheels: 2" (DB5720)
Tail Wheel: 1/2" (DU50TW)
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Old Time Stunt Legal By J.C. Yates

Wing Span: 50"
Length: 31"
Area: 460 sq. in.
Full-Size Plans
Large Nylon Bellcrank
Lead-Out Cables
1st in OTS - Ignition at the Vintage Stunt Championships 2002!
Fully Adjustable Leadouts
Arrowshaft Pushrod
Engine .35-.40
Laser Cut Kit



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Engine
(pick one): .35 (FX13500C)
Engine
(pick one): .40
Propellor: 10" (RSM1060)
Propellor (alternate): 11" (RSM1160)
Fuel Tank: 4 oz. (OTS400)
Spinner: 2" (VOR200)
Main Wheels: 2 1/4" (DB5722)
Tail Wheel: N/A
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Old Time Stunt Legal by Bud Jamison
Flown at the 1947 NATS!

Wing Span: 50"
Length: 32"
Area: 507 sq. in.
Full-Size Plans
Large Nylon Bellcrank
Lead-Out Cables
1st, 2nd & 3rd in OTS at the 2000 NATS!
Fully Adjustable Leadouts
Arrowshaft Pushrod
Engine .35-.40



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Spinner: N/A
Engine (pick one): .35 (FX13500C)
Engine (pick one): .40
Propellor: 10" (RSM1060)
Propellor (Alternate): 11" (RSM1160)
Fuel Tank: 4 oz. (OTS400)
Main Wheels: 2 1/4" (DB5722)
Tail Wheel: 3/4" (DU75TW)
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Madman - Old Time Stunt by J.C. Yates

Wing Span: 49"
Area: 411 sq. in.
Length 31 1/4"
Engine: .35 - .40
Formed Wire landing Gear
Full-Size Plans
100% Laser Cut Parts
Accurate Rib Cut Outs for Jig Construction
Contest Grade Balsa
Deluxe Hardware Package
Adjustable Leadout Guide



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Engine: .35 (L&J Fox)
Propellor: RSM10-6 (RSM1060)
Fuel Tank: 3 1/2 oz. (OTS350)
Spinner: 2" (VOR200)
Main Wheels: 2 1/2" (DB5725)
No Tail Wheel:
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Published in 1950 by Bill Winter

Wing Span: 44"
Length: 29-1/2"
Area: 436 sq. in.
Engine: .25 - .35
100% Laser Cut
Contest Balsa
Full-Size Plans

Fully Laser cut from contest grade balsa.

Includes professional grade hardware package.

For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Spinner: N/A
Engine: .25 (OSLA25)
Propellor: 9"
Fuel Tank: 3 1/2 oz. (OTS350)
Main Wheels: 2 1/2" (DB5725)
Tail Wheel: 3/4" (DU75TW)
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Old Time Stunt Legal

Wing Span: 42"
Length: 24 1/4"
Area: 381 sq. in.
Full-Size Plans
Large Nylon Bellcrank
Lead-Out Cables
Fully Adjustable Leadouts
Arrowshaft Pushrod
Engine .19-.35
Laser Cut Kit



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Spinner: N/A
Engine (pick one): .35 (FX13500C)
Engine (pick one): .25 (OSLA25)
Propellor: 10" (RSM1060)
Propellor (Alternate): 9"
Fuel Tank: 4 1/4 oz. (GRW425C)
Fuel Tank (Alternate): 3 3/4 oz. (GRW375C)
Main Wheels: 2 1/4" (DB5722)
Tail Wheel: N/A
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Old Time Stunt Legal

Wing Span: 42"
Length: 24 1/4"
Area: 381 sq. in.
Full-Size Plans
Large Nylon Bellcrank
Lead-Out Cables
Fully Adjustable Leadouts
Arrowshaft Pushrod
Electric Power
Laser Cut Kit

The venerable RINGMASTER which can be taken apart for easy transportation. Electric Powered, it can be carried on a commercial aircraft.

For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Main Wheels: 2 1/4" (DB5722)
Tail Wheel: N/A
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Designed in 1951 by Don Still

Wing Span 47-1/4"
100% Laser Cut Parts
Area 479 Sq. In.
Accurate Rib Cut Outs
Length 33-1/4" for Jig Construction
Engines .25-.29
Contest Grade Balsa
Old Time Legal
Deluxe Hardware
Full-Size Plans
Adjustable Lead Outs



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Spinner: 1 3/4" (VOR175)
Engine (pick one): .35 (FX13500C)
Engine (pick one): .25 (OSLA25)
Propellor: 10" (RSM1060)
Propellor (Alternate): 9"
Fuel Tank: 3 1/2 oz. (GRW350BU)
Fuel Tank (Alternate): 4 oz. (GRW400BU)
Main Wheels: 2 1/4" (DB5722)
Tail Wheel: 3/4" (DU75TW)
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

OTS Legal by Jim Ebejar

Wing Span: 50"
Length: 38.8"
Area: 520 sq. in.
Engine: .35 - .40
100% Laser Cut
OTS Legal



For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section

Wildman 60 by Floyd Carter.
Designed in 1950 this Old Time Legal model was originally powered by an ignition engine.
Wing span is 59-3/4".
Fuselage length is 37-3/8".
Wing Area is 694 Sq. In.

Kit is 100% laser cut using the finest grade contest balsa and birch plywood. It comes complete with full size printed plan, adjustable wing tip weight box, adjustable lead out guide and a 4" bell crank.
Model can be built for ignition, glow or electric power.
Wing has dihedral so the wing tips are at the vertical C/G for even insides and outsides.

Old Time Stunt Legal

Wing Span: 42"
Length: 24 1/4"
Area: 381 sq. in.
Full-Size Plans
Large Nylon Bellcrank
Lead-Out Cables
Fully Adjustable Leadouts
Arrowshaft Pushrod
Electric Power
Laser Cut Kit

The venerable RINGMASTER which can be taken apart for easy transportation
Electric Powered, it can be carried on a commercial aircraft.

KIT with Complete RSM Electric Package

Power package which includes prop, motor, speed controller, KR Governor & Battery is fully bench tested and comes ready to install.

For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Main Wheels: 2 1/4" (DB5722)
Tail Wheel: N/A
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice

Old Time Stunt Legal

Wing Span: 42"
Length: 24 1/4"
Area: 381 sq. in.
Full-Size Plans
Large Nylon Bellcrank
Lead-Out Cables
Fully Adjustable Leadouts
Arrowshaft Pushrod
Electric Power
Laser Cut Kit

The venerable RINGMASTER which can be taken apart for easy transportation. Electric Powered, it can be carried on a commercial aircraft.

For the scratch builder, Rib Sets, Canopies, and Plans are available in the Building Supplies section
Additional items needed to complete the kit:
Main Wheels: 2 1/4" (DB5722)
Tail Wheel: N/A
Hinges: Builder's Choice
Fuel Line: Medium (FLM2)
Fuel Filter: (SU187)
CA Glue: (HFCAG2)
Epoxy: 15 or 30 minute Recommended
Paint: Builder's Choice